All Honda oils and fluids are specially formulated to meet the precise standards of quality established by Honda and are recommended to be used throughout the life of your Honda vehicle
Engine oil lubricates the engine's moving internal parts to protect them against wear and reduce friction. It also creates a protective seal between the moving and stationary parts, all while helping to cool the engine. As engine oil deteriorates with time, it loses its ability to properly protect the engine. Follow the recommended oil changes intervals specified by your Honda’s Owner’s Manual or Maintenance Minder system (if equipped).
Engine OilHonda 0W-20 engine oil is a full synthetic formula that provides advanced protection against oil breakdown for a cleaner running engine. Oil naturally becomes thicker at lower temperatures and thinner at higher temperatures. Oil viscosity is how thick or thin an oil is, which affects how it flows in the engine. Thinner oil has a lower viscosity, and therefore flows faster. The thin properties of Honda 0W-20 engine oil allow the oil to circulate more quickly, reducing engine operating temperatures and increasing cold start protection when most engine wear takes place and reducing friction to promote lower fuel consumption.
Reduce engine wear and protect your investment by choosing Genuine Honda 0W-20 engine oil. Applicable to most model years – consult with your Honda dealer for compatibility.
Engine coolant acts to absorb and regulate the heat that is naturally generated by the engine to keep the engine running at an optimum temperature. It also contains anti-freeze to permit operation in very cold temperatures, while at the same time protecting the cooling system components with its anti-corrosion properties. As the coolant's properties deteriorate with time, it is necessary to replace the engine coolant at the recommended service intervals. It is also recommended to check the coolant level regularly. Coolant loss may indicate a cooling system problem or leakage that could lead to engine overheating and damage.
Automatic Transmission Fluid acts to cool and lubricate internal transmission components. Over time, the properties of the fluid diminish and replacement is necessary at the recommended service intervals for your Honda vehicle. An inspection of the transmission, fluid hoses, pipes, and cooler (if equipped) should be performed during recommended maintenance.
When the brake pedal is pressed, the brake fluid transfers hydraulic force to the brake calipers to slow or stop the vehicle. Brake fluid tends to absorb moisture from the air and as a result the performance of the fluid deteriorates over time. Brake fluid should be replaced every 3 years. The brake hydraulic component system should also be inspected for leaks or damage.
Brake FluidBrake fluid is also contained in the modulator that controls brake system pressure during ABS (anti-lock brake system) and VSA (vehicle stability assist) operation.
Brake fluid is used in the hydraulic clutch system on vehicles equipped with a manual transmission. It requires replacement for the same reasons and at the same intervals as the fluid in the brake system.
